Fabrication: Roof

Fabrication: Roof
Click on first or any photo for enlarged view...
"Highlighted in Red = SOLD !"
Installation, Service and Training available from OEM or Independent Contractors at Buyers Expense.

14' Alpine Side Eject Gantry System
w/ Finish Roller

1995 14' Alpine Side Eject Gantry System, 14 Tables with 2' of Steel (Drilled and Tapped) balance Plastic. Includes Ejectors, Receivers, Powered 14' Inside Conveyors. Gantry Head and Finish Roller at 14'x20". Not included - Air Lines, Overhead Power or Gravity Conveyor Outside. This is an older model - but take a look at the photos - this System has had very little use and looks to be in great condition. It has been removed and is ready for immediate shipment. Will take 2 Full Trucks.
Condition: **** As from service.
Model Year = 1995
Wired 208v/3ph
S/N: 700-008
Location = South Central Canada
#M0057

Pacific Automation 14' x 24" Finish Roller

See spec sheet for details. Very Nice Unit.
Condition: **** As from service.
Model Year
S/N:
Location = Western Canada
#TT00052

Pacific Automation - 14' Gravity Conveyor

3 & 1/2 Sections of Pacific Automation Gravity Conveyor - 14' wide x 20' long sections (4' OC with 6 rolls per section). Very Good condition - has been out of service in the dry Western US for last 7 years. It's ready now and will be dismantled for shipment.
Condition: **** As from service.
Conveyor Model Year = 2005
S/N:
Location = Western USA
#SV00008

Recently Sold Units

Linkwood 14' x 20" Finish Roller

Alpine 15'6" x 20" Finish Roller

14' Klaisler End Eject Gantry System
w/ Finish Roller

Klaisler 14' End Eject Gantry System, 7 Tables with Good Plastic Tops. Includes Table Mounted Rolls, 3 Inside Roller with Extended Track for End Eject Park Station. Gantry Head and Finish Roller 14'x24". Not Included - Air Lines, Overhead Power or Conveyor Outside. Nice clean unit without much appanent use. If you need additional capacity, this System would fit most anywhere. It has been removed and is ready for immediate shipment.
Condition: **** As from service.
Model Year =
S/N: 1730 & 1723(?)
Wired 230v/3ph
Location = South Central Canada
#M0005

Alpine 15'6" x 24" Finish Roller

14' x 24" Finish Roller

1995 Pacific Automation 86' TR Gantry

14' Donway Finish Roller

2007 Pacific Automation Auto-8' x 45'

1990's Klaisler End Eject Gantry Line
w/ Finish Roller

2005 Pacific Automation 16RT Gantry System w/Peak-Up Stacker

14'6" x 24" Tee-Lok Finish Roller #1

4 Arm Tee-Lok Peak-up Stacker - Rebuilt

2008 5' x 18" 2x_ and / or 4x_ Finish Roller

14'6" x 24" Tee-Lok Finish Roller #2

14'6" Alpine Finish Roller

1986 Gang-Nail Mark V

Gang-Nail Mark V

2004 15'6" x 24" Alpine Finish Roller

14' x 24" Robbins Finish Roller #2

14'6" x 24" Tee-Lok Finish Roller #2

14'6" x 24" Tee-Lok Finish Roller #1

14' x 24" Robbins Finish Roller #1

14'6" Alpine Finish Roller

1998 Pacific Automation 14TR Gantry

Tee-Lok Gantry System - 50'

15'6" Alpine Finish Roller

14' MiTek Finish Roller

1997 16' Pacific Automation Finish Roller

1987 Jager 14' Finish Roller

2000 15'6" Alpine Finish Roller

2006 14' Rand Finish Roller

2005 MiTek End Eject Gantry
Four (4) Systems Available

2005 MiTek 60' Peak-Up Stacker
Two (2) Units

2003 MiTek RoofGlider Gantry
& Finish Roller

MiTek RoofGlider Specs

1999 MiTek RoofGlider Gantry
& Finish Roller

My "estimation" as to the Condition of the listed equipment...
Your inspection is most welcome. Please read the Purchase Agreement for details.
(5) ***** = Near New/Excellent, (4) **** = Very Good, (3) *** = Good, (2) ** = Fair, (1) * Poor.